Products

WE DON’T DO IT ALL. BUT WE DO IT WELL.
Contact Us

We never sacrifice quality. Never. What you can expect is cost-effective solutions that will give you long-lasting results. Weather resistance. Energy efficiency. Economically smart. We offer a wide variety of metal building solutions, all of which are backed by a five-year manufacturer's warranty.

ROOF PRODUCTS

WHEN IT COMES TO YOUR ROOF, YOU SHOULD HAVE LOFTY EXPECTATIONS. WE CERTAINLY DO.

When we began designing roof systems, we found most customers expected the worst of their roofs. Leaks. Maintenance. Cost. But at Chief Buildings, we've worked hard to remove these worries. The result—our advanced standing seam roof series. These high-performance solutions provide year-after-year peace of mind.

Here's What you Can Expect

 

WEATHER RESISTANCE

Each and every panel is built to defend against wind, fire, hail, and leaks. How do we do it? Part of the secret is our innovative locking design and specially engineered clips that eliminate the use of those pesty nails and screws.

 

RIGID CONSTRUCTION

Virtually maintenance free, our rigid panels prevent water from pooling. Our design also allows for expansion and contraction to weather any temperature. Available in our popular Ultra-Kote Premium finish, this finish provides extraordinary, long-lasting color.

 

ENERGY EFFICIENT

Metal building solutions provide significant energy savings compared to other roof types. Our roofs are constructed with thermal blocks that stop the conduction of cold, while additional space between the panels and structure creates room for insulation.

 

ECONOMICAL ADVANTAGES

Here’s the bottom line — you'll see lower energy costs and save on expensive repairs. Invest up front, reap the benefits later.

 
CS PANEL
  • Chief Buildings CS Roof Panel

    QUICK, STURDY, ECONOMICAL

    CS panels are an economical solution perfect for getting the job done. They require fewer components and don’t need specialized labor to assemble. Although versatile, they’re best suited for moderately or steeply pitched roofs.

    Ultra Kote Color Chart    Ultra Kote Premium Color Chart

  • MSC PANEL
  • MVF/MVP
  • STC
  • Chief Buildings MSC Roof Panel

    MECHANICALLY SEAMED CONSTRUCTION

    If you need strength, you need MSC panels. This is the strongest roof we provide, intended for low sloped commercial buildings. The panels create an airtight seam to provide outstanding weather tightness and wind resistance over incredible spans of square footage.

    Ultra Kote Premium Color Chart

    Chief Buildings MSC Roof Panel
  • Chief Buildings MVF-MVP Roof Panels

    STRENGTH AND STYLE

    Sometimes you need a little beauty to go with brawn. Show off your roof. Both the MVF and the MVP provide all the strength you need with an attractive look you desire.

    Ultra Kote Premium Color Chart

  • Chief Buildings STC Roof Panel

    Snap tight Construction

    The cost efficient alternative for commercial use applications. The snap together seam means there is no need for a mechanical seamer and can allow for quicker project completion while cutting construction and repair costs. Weathertightness. Check. Low maintenance. Check. Proven alternative. Absolutely.

    Ultra Kote Premium Color Chart

  • STEEL: THE ULTIMATE SUSTAINABLE MATERIAL

    Steel, unlike other construction materials,  can be recycled over and over again—without ever losing quality. it’s called multi-cycling, and the result is that old steel can be reborn into new structures.

    STEEL MANUFACTURING IS A PROCESS—AND THANKS TO MULTI-CYCLING—IT HAS NEVER-ENDING LIFE CYCLE. RECYCLED STEEL CAN COME FROM MANY PLACES, INCLUDING:

     

    Consumers:

    Almost 100% of out-of-service cars are recycled every year. Recently, that yearly total accounted for recycled steel equivalent in weight to 11.6 million cars.

     

    Deconstruction:

    Steel components removed from a building can be re-used and never sent to a landfill.

     

    Waste:

    Steel generates virtually no on-site construction waste. And if there is waste, you guessed it. It can be recycled.

     
  • STEEL: THE ULTIMATE SUSTAINABLE MATERIAL

    Steel, unlike other construction materials,  can be recycled over and over again—without ever losing quality. it’s called multi-cycling, and the result is that old steel can be reborn into new structures.

    STEEL FABRICATION, THE PROCESS OF MANUFACTURING PROJECT-SPECIFIC COMPONENTS, ACCOUNTS FOR 70% OF LABOR ASSOCIATED WITH FINISHED STEEL PRODUCTS.

    For that reason, we have implemented some of the industry’s most efficient fabricating processes at Chief Buildings, and any waste generated is recycled. Finally, we take great pride in working with each and every customer to create the most energy-efficient buildings.

     
  • ENERGY-EFFICIENT PROCESSES

    HERE ARE SOME OF THE POSITIVE RESULTS OUR INDUSTRY IS MAKING:

     

    One ton of steel can be made in half an hour, compared to 1980 when 12 hours were needed to create the same amount. The result—less energy is consumed in today’s mills.

     

    Steels' carbon footprint has been reduced by 47% since 1990.


     

    95% of the water used in steel production is recycled. The result—only 60 net gallons of water are used to produce one ton of steel.

     
  • ENERGY-EFFICIENT STRUCTURES

    HERE ARE SOME OF THE POSITIVE RESULTS OUR INDUSTRY IS MAKING:

     

    Our steel structures, fabricated offsite, can be erected quickly in the field, reducing construction equipment emissions.

     

    Our steel generates virtually no on-site construction waste, and any waste generated is recycled by our network of builders.

     

    We build to suit endless operational needs, making companies (and their buildings) run more efficiently.

     

Electrocoating

HOW ELECTROCOATING WORKS

Electrocoating is a process in which we apply gray oxide primer to our structural steel members to prevent corrosion. This process, superior to any spray-on application, allows us to completely coat the steel with primer, even in the tightest corners. There is no other process in the industry that gives the same consistent result.

We won’t bore you with the details of how it works, but here’s what you need to know: Electrocoating is aptly named, as the process involves using electric currents to create a protective coat on the steel.

The result is a visually appealing, smooth gray finish that is water resistant. Better yet, it’s paintable. Add a finish coat and enjoy the look you deserve.

  • First, we carefully balance the gray oxide primer with water-insoluble resins. These resins are converted chemically into salts so that they can easily be dispersed into water. The salt formation makes the primer have a negative charge.

  • Then, before priming the structural steel members, we connect the steel to the positive side of a DC power supply to give them a positve charge. The primer tank itself, is wired to the negative side of the power charge.

  • When the power supply is activated, the current flows from the negatively charged tank to the positively charged structural steel, causing the negatively charged primer particles to migrate to the steel, plating to the surface and penetrating virtually everywhere.

    This two-minute plating process creates an electro-chemical reaction on the surface that changes the primer salts back to their original state. Meanwhile, the 300 VDC voltage involved in the process creates an electronic pressure that thickens the resin, resulting in a film that is not only water insoluble but virtually 100 percent solid. The positive-negative attraction forms a smooth finish.

  • After coating, the parts are baked in an oven, converting the film to a hard, abrasive enamel, creating one of the most corrosion-resistant structures in the industry.

WALL PRODUCTS

BECAUSE FIRST IMPRESSIONS MATTER

Metal wall panels may look very similar, but the differences can be more important than you ever imagined. CHIEF's wall panels are functional and attractive while remaining economical. Available in a range of standard colors in either Ultra-Kote or Ultra-Kote Premium finishes, you are sure to find a look that will last.

Here's What you Can Expect

 

DESIGN FREEDOM

Our wall systems look great on their own, or serve as a lovely compliment to other finishes such as brick or EIFS. Steel is flexible, so our wall panels can be used to create curved corners or accents.

 

DURABILITY

Our wall panels are available in 24- or 26-gauge steel with 1 1/8" deep ribs every 12” and intermediate stiffening ribs. . . all that jargon means these panels are ready to take on the elements.

 

QUALITY FINISHES

Get a look that lasts. Whether you choose CHIEF's Ultra-Kote, an advanced silicone polyester finish or Ultra-Kote Premium, a polyvinyldene fluoride (PVDF) finish, you can be sure your building's looks won't fade away.

 

ADVANTAGES

First impressions don’t have to break the budget. Both CHIEF Standard (CS) panel and Architectural Panel (AP) will create an attractive appearance while maintaining budgets and schedules.

 
  • CS PANEL
  • AP PANEL
  • Chief Buildings CS Wall Panel

    SUPERIOR MATERIALS MAKE SUPERIOR PRODUCTS

    Not all walls are created equal. CHIEF's CS panels have the edge when it comes to quality metal wall panels. It’s okay to get inventive — they can be used as interior liners, fascia, canopies, and soffits. CS panels are readily available; perfect for those who need to get the job done fast.

    Ultra Kote Color Chart  Ultra Kote Premium Color Chart

  • Chief Buildings AP Wall Panel

    AN EYE TO AESTHETICS

    Find the screws to be unsightly? We understand. Our AP panels provide the strength and versatility of a CS panel with an added dose of curb appeal.

    Ultra Kote Color Chart    Ultra Kote Premium Color Chart

  • CS/AP PANEL
  • FSP PANEL
  • Chief Buildings CS-AP Wall Panels

    SUPERIOR MATERIALS MAKE THE DIFFERENCE

    Simple. Durable. CS/AP panels provide an attractive alternative capable of covering larger areas.

    Ultra Kote Color Chart    Ultra Kote Premium Color Chart

  • Chief Buildings FSP Wall Panel

    SIMPLY ATTRACTIVE

    The FSP panel is designed specifically for soffits. They install with concealed fasteners to provide a sleek appearance. The simple, interlocking design makes construction a breeze.

    Ultra Kote Premium Color Chart

BUILDING SYSTEMS

SERIOUSLY SMART. SERIOUSLY ECONOMICAL. SERIOUS RESULTS.

Buildings aren’t just for working in. Buildings should work for you. Combining today's technology with years of design experience, our Smart Series pushes the boundaries of what a building can accomplish.

Our fully automated fast-track process allows you to take control of your schedule. And we’ll do our part to keep your project moving forward with accelerated manufacturing and a dedicated trucking service.

It’s okay to demand more from your building. We build our products to deliver cost-effective, low-maintenance, energy-efficient results, backed by some the industry's best warranties.

 

SMART SERIES BUILDINGS

Buildings can be simple. You read that right. We prepare the materials for Smart Series Buildings in a highly efficient and economical way, allowing you to build to your specifications without the threat of breaking the bank.

Smart Building
ULTRA-KOTE and ULTRA-KOTE PREMIUM FINISHES

Featuring the most durable paint finishes in the industry, your building will boast a fade-resistant finish.

ENGINEERED-STAMPED DRAWINGS:

Our buildings are always designed "to spec". We provide signed and stamped drawings for every building we supply.

ALL-STEEL BUILDINGS:

Smart Buildings feature complete steel construction, utilizing 26 ga. and 24 ga. exterior panels of 80ksi grade to offer endurance and long-lasting value.

SMART STORAGE

Make your square feet work harder. Specialized designs, utilizing cold-formed members, mean more efficient use of steel all while meeting applicable design codes. This is your best value for commercial storage projects.

Smart Storage
ULTRA-KOTE and ULTRA-KOTE PREMIUM FINISHES

Featuring the most durable paint finishes in the industry, your building will boast a fade-resistant finish.

ENGINEERED-STAMPED DRAWINGS:

Featuring the most durable paint finishes in the industry, your building will boast a fade-resistant finish.

ALL-STEEL BUILDINGS:

Smart Buildings feature complete steel construction, utilizing 26 ga. and 24 ga. exterior panels of 80ksi grade to offer endurance and long-lasting value.

SMART CANOPY

Don’t let covering a door, equipment, or entryway become a headache. Smart Canopy is a pre-designed structure that puts an attractive finishing touch on your project.

Smart Canopy

SMART COMPONENTS

Finding extra materials can be a real challenge during a metal building project. If you’re short a few bits and pieces during a job, or if you’re tackling a project on your own, we have what you need at CHIEF.

Smart Components

Contact Us Call 1-800-845-1767 to begin your fast-track process today.

Contact Us

 
State:
County:
State:
County:
Reason for contacting
At least one checkbox should be checked. Please check one!
This field is required!

Thank You

Your Email has been sent